Elipson Launches Classic Sub 8, 10 and 12: Simple Ported Subs Built to Chain Together

WooferGuy is reader-supported. When you buy through an Amazon link on this page we may earn a commission, at no extra cost to you. It never decides what we recommend. How this works.

French brand Elipson has launched a new family of budget-to-midrange subwoofers called the Classic Sub, in 8-, 10- and 12-inch sizes. On paper they’re straightforward ported subs, but there are a couple of thoughtful details here, especially for anyone running more than one subwoofer. Here’s the rundown.

The short version

  • Three ported models: Classic Sub 8, 10 and 12, with 150 W, 200 W and 300 W class-D amps.
  • All three use a DSP bass boost centred around 33 Hz plus a subsonic filter to protect the driver.
  • Dedicated LFE input and stereo line outputs, so you can chain a second sub.
  • European pricing: €299, €499 and €699. US availability hasn’t been confirmed.

The three models

Classic Sub 8Classic Sub 10Classic Sub 12
Driver8-inch10-inch12-inch
Amplifier150 W200 W300 W
Quoted response37–200 Hz29–160 Hz25–160 Hz
Crossover range40–200 Hz40–160 Hz40–160 Hz
Size (W×H×D)256×322×350 mm306×372×410 mm356×422×470 mm
Price (EU)€299€499€699

Note the quoted frequency ranges don’t include a tolerance (± dB), so treat them as a rough guide rather than something you can compare directly with other brands. We explain why in subwoofer specs explained.

What’s interesting

DSP boost plus a subsonic filter

All three subs apply a roughly 6 dB DSP lift around 33 Hz and pair it with a subsonic filter in the low 20s. That’s a sensible combination: the boost extends the usable low end of a ported box, while the filter stops the driver from flapping uselessly below the port’s tuning, which is where ported subs are most at risk of damage. It’s the kind of protection that was once reserved for pricier subs.

Built for more than one sub

Each model has a dedicated LFE input as well as stereo line inputs, plus a stereo line output to pass the signal on. That makes daisy-chaining a second sub simple, which is useful because two subs usually give smoother bass across a room than one bigger sub.

The controls are basic

Phase is a 0/180° switch rather than a continuous control, and there’s no app or room EQ. That’s normal at these prices, but it means placement and your receiver’s room correction will do the heavy lifting. See subwoofer placement and phase explained.

Should US buyers care?

Elipson is primarily sold in Europe, and we haven’t seen US pricing or Amazon listings yet. If you’re in the US and like the idea of a simple ported sub with flexible inputs, two similar options are already available: the Dayton Audio Classic CS1000 (10-inch) and CS1200 (12-inch), both with LFE, stereo RCA and speaker-level inputs and a 5-year warranty. They’re in our best budget subwoofers guide.

Our take

The Classic Sub range looks like a sensible, honest set of subs: proper driver sizes, real protection and chainable outputs at fair European prices. We’d like to see a continuous phase control and published ±3 dB figures, but for a simple living-room upgrade, the 10- and 12-inch models look like the sweet spots.

Sources

Written by Ryan Smith

WooferGuy news posts are based on manufacturer announcements and the reporting linked in the sources. We haven’t tested these products unless we say so. How we research.

Scroll to Top