Grand Theft Auto VI arrived on November 19 for PlayStation 5 and Xbox Series X|S, and a lot of people are asking the same thing: which subwoofer should I get for it? There’s no official GTA 6 subwoofer, and you don’t need a special one. What you do need is a sub that’s actually connected to how your console sends audio, plus a few settings that most setups get wrong. Here’s what’s confirmed about the game’s audio and how to get proper low end out of Vice City.
The short version
- GTA 6 launched November 19 on PS5 and Xbox Series X|S; Xbox One owners can stream it through Xbox Cloud Gaming.
- Xbox’s store listing names Dolby Atmos, DTS:X and Spatial Sound. On PS5, the game uses Sony’s Tempest 3D AudioTech.
- Neither console has an optical output, so your subwoofer needs to be part of an HDMI chain: a soundbar with a sub, an AV receiver, or powered speakers fed from your TV.
- Most bass problems come from settings and placement, not the sub. Check the TV’s eARC output, the console’s audio output and the crossover first.
What’s confirmed about GTA 6 audio
Microsoft’s Xbox Wire post confirms the November 19 launch on Xbox Series X and Series S. Xbox One owners can only play by streaming, and the cloud version uses Series S settings. The game’s Xbox Store page lists Spatial Sound, Dolby Atmos and DTS:X among its capabilities. In practice, that means an Atmos- or DTS:X-capable soundbar or receiver can get a bitstream from the Xbox, with the LFE (bass) channel going to your sub.
On PS5, launch coverage reports that the game’s PlayStation Store listing calls out Tempest 3D AudioTech, Sony’s spatial audio system. Tempest is mostly about headphones and positioning. For speakers, what matters is the PS5’s audio output menu, covered below.
Rockstar hasn’t published a detailed breakdown of in-game speaker options, so we’d treat claims about specific in-game sound menus with caution until you see them on your own console.
Four ways to add a subwoofer for GTA 6
| Setup | How the sub gets bass | Best for | Watch out for |
|---|---|---|---|
| Soundbar with wireless sub | Console → TV → HDMI eARC → soundbar; sub pairs wirelessly | Most living rooms | You’re usually locked to that brand’s sub |
| Soundbar with a sub output or add-on sub | Same HDMI chain; sub connects by cable or the maker’s wireless kit | Upgrading a bar you already own | Not every bar has a sub out; check before buying |
| AV receiver + powered subwoofer | Console → receiver HDMI (or TV eARC → receiver); sub on the LFE/sub pre-out | Dedicated rooms, full Atmos/DTS:X | Needs bass management: set speakers to Small and crossover around 80 Hz |
| Powered speakers with a sub out | TV eARC or the TV’s optical out → speakers → sub | Bedrooms and desk setups | Stereo only, so no true surround |
If you already have a soundbar, start with our guide on how to set up a subwoofer with a soundbar. If your TV feeds the speakers directly, see how to connect a subwoofer to a TV without a receiver.
For a ready-made soundbar system, the Samsung HW-Q990H (pictured) is an obvious example. Samsung lists it at $1,999.99 as an 11.1.4-channel set with a compact dual active subwoofer. It was also named soundbar Product of the Year at the 2026 What Hi-Fi? Awards on November 12, which we covered in our awards roundup.
Console settings that decide whether your sub works
PS5
- PlayStation’s support page puts the main control under Settings > Sound > Audio Output > HDMI Device Type.
- If you use an AV receiver, choose AV Amplifier. That unlocks Number of Channels and speaker position settings, so the PS5 sends a proper multichannel mix with an LFE track.
- With a soundbar on the TV’s eARC port, make sure the TV is set to pass audio through (often called Auto, Bitstream or Passthrough) rather than forcing PCM stereo.
Xbox Series X|S
- In the console’s speaker audio settings, pick the bitstream format your soundbar or receiver supports (Dolby Atmos or DTS:X). Choose a multichannel PCM option if it doesn’t support either.
- If your bar is stereo plus a sub, a 5.1 or Atmos signal still helps, because the bar handles the downmix and sends the LFE to the sub.
Both consoles
- Crossover: 80 Hz is the safe starting point for most setups. Our crossover calculator narrows it down for your speakers.
- Placement: a sub in a corner gets louder but boomier. If car chases sound one-note, try the placement calculator or the sub crawl. With a soundbar system, our guide on where to place a subwoofer with a soundbar covers the common layouts.
- Late nights: use night mode or dynamic range compression instead of cranking the sub down to nothing. Apartment owners should read our apartment subwoofer guide. If you’re worried about rattles and vibration, see can a subwoofer damage a house?
What it means for you
If you already own a decent subwoofer, you probably don’t need to buy anything for GTA 6. Check that the console is sending a multichannel signal, that the TV is passing it through on the eARC port, and that the sub’s level and crossover are set sensibly. If you’re shopping, decide on the hub first (soundbar or receiver), then the sub. Our best subwoofer for gaming guide sorts options by room size. If you were hoping for Sony’s Pulse Elevate desk speakers, they’ve been delayed indefinitely.
Our take
“GTA 6 subwoofer” is mostly a marketing phrase. Any good sub will do, as long as it sits on a system that actually gets the game’s LFE channel. On paper, the Xbox version has the cleaner path to a home theater with Dolby Atmos and DTS:X listed on the store page. PS5 owners can still get full multichannel bass by setting the console to AV Amplifier. Spend an evening on settings and placement before you spend money.
Sources
- Xbox Wire: Grand Theft Auto VI on Xbox and Xbox Cloud Gaming (Nov 10, 2026)
- Xbox Store: Grand Theft Auto VI listing
- PlayStation Support: change audio output on PS5
- GamesRadar: GTA 6 uses Tempest 3D AudioTech (Jun 25, 2026)
- Samsung Newsroom: 2026 Q-Series soundbars
- What Hi-Fi?: 2026 Product of the Year winners (Nov 12, 2026)